How do I anchor a bathroom towel bar when there is spackle in the hole where it originally fell out? - bathroom towel bar double
The towel rack in bathroom was leaving 2 holes in my drywall. I dry the filler hole to allow for 3 days, then sanded. When I tried to re-anchor the towel (with anchors of news, of course) drying in the hole filler is simply not strong enough for an anchor and a screw. When I try to put a screw through the anchor of the filler, is weak and fragile, and basically at the end of the anchor slipped in the wall. HELP! I have also tried using Mighty Putty, but it stinks. Suggestions on techniques or products?
Saturday, January 16, 2010
Bathroom Towel Bar Double How Do I Anchor A Bathroom Towel Bar When There Is Spackle In The Hole Where It Originally Fell Out?
6 comments:
Randy talks about changing the screws and that's what you should use.
You probably have to make the holes a little larger fit for the change in the hole. The plastic plugs that were used for the first time, were not really the best thing to use is why the bar has fallen. Is unable to turn himself to the bolts.
Purchased at any hardware store. Get 1 / 4 "x 2" and do not forget, a seller, how to properly ask before leaving the store use.
Ideally, try to anchor the towel a couple of tacos. If you do this can not, use Molly anchors that are stronger than the anchors before they are used. Were used when the wall reinforced.
I personally hate toggle bolts and avoid them whenever I can.
You can try is the anchor point for a room at the end of the spreads and disadvantages in the back - not remember her name, but when opened, they will "T"
Move the cursor and have to cancel. It is never in the same area with filler.
Towel is a problem, unless it can be anchored by a miracle in a bar at each end. Even a hit, the amount is not sufficient.
I suggest you install a map on the wall, then at the bar. Get a PC. Wood trim about 2-3 "on the towel and go about 5-1/2 inches wide. Prime and paint the color in the toilet. Use liquid nail glue to the wall, there are also tacos, if you can wait., required until the next day, including towels. Being wet with a heavy cloth. Any kind of rock bolts, Molly, or by other means fixing it always ends in a towel loosely, then it ends with one end attached to a morning . In the reorganization is always the owner of the location of the towel rack, mirror, Access. and then install the lock on the definition for this purpose.
Do It Right this time.
You have to some reconstructive surgery in both places not where the pavement anchor wine. The idea is provided on the back of the hole with wood glue on the back of the hole, then fill the hole with strengthening filler. Then you have something solid to sink the screws and anchors.
First, dig the putty and enlarge the holes a little further, so that 1 "square or less. You will be a dock or a thick piece of wood 1 / 2 must be" d "thick and 2" long x 3 / 4 inches high for each hole. Place a coin mean drop yellow wood glue on the side of the timber touching the back of the plasterboard. Bring a piece of string around the middle of the block and add it to a pencil, then drag the corner of the page through the hole. Bring the string around the pencil until the wedge is firmly with the back of the drywall in the right place to be installed, then use the blue tape to the pin on the front of the repairs be secured.
Allow to dry for at least 24 hours, then fill the hole with several thin layers of filler, sanding to remove more, then paint.
You should now be ready to replace the towel, but wood screws schedule.
Post a Comment